Introducing the Uni-Gen Converter: an all-in-one controller converter for your Commodore 64, Amiga, Atari, Game gear, spectrum and Sega Master System!
~Features~
-
Built-in Adjustable Auto-Fire with LED indication
-
Mapping of jump (Up) to the A button (with removable jumper)
-
ZERO lag. No microcontroller
-
True-floating outputs for the safest adapter yet
-
Short-circuit protection
-
low power consumption
-
Compatible with all official Genesis / MD pads including the Retro-bit and Krikzz Joyzz
-
Upgrade board available for playing on PC-Engine
-
Stylish 3mm clear Acrylic case design w/ chrome knob
​
Shipping anywhere on Earth!
(ask about delivery to your galaxy)
When ordering, please specify which board option you want:
​
-
Option 1: preset to Amiga / C64 / Atari 2600 w/A button as jump (up)
-
Option 2: preset to Sega Master System (B and C = 1 and 2 with 1 being auto-fire support)
-
Option 3: preset to Sega Master System (B and C = 2 and 1 with 2 being auto-fire support)
-
Option 4: preset to Atari 7800 (L button has auto-fire support)
-
Option A: (new with V2.9): Swap A and B buttons (jump as B and shot as A)
Note: some consoles will need an extension cord (about $3.00) to connect a Uni-Gen. I recommend something like this one.
See the Shop for pricing & availabilty
(ask about unassembled PCB discounts)
(shipping not included)
Please read the FAQ for more info :)
For more detailed info on the tech of how the Uni-Gen Converter works, click here.
Uni-Gen Compatibility Chart
*some consoles will need an extension cord (about $3.00) to connect a Uni-Gen.
I recommend something like this one.
** For playing on a ZX Spectrum, you can use a converter like this one or one of these.
Ask about new Retro-bit controllers to go with your purchase!
(some units in stock)
Uni-Gen DIY
install kits available
Ask about the new EZ-Gen install boards!
<< Uni-Gen installed inside
a Sega Game Gear!
Uni-Gen installed inside
a Sega Master System! >>
<< Uni-Gen Game Gear
installation picture.
Click here for full size image.
​
Additional Instructions in the
manual over here.
​
Install video can be found here.
Uni-Gen add-on to play PCE with a Genesis / MD controller!
-
Includes 6ft extension cord
-
Fuse protection
-
3mm LED-glow acrylic case
Click Here for details!
​
Warranty Info:
This product comes with a 7-day return policy. If you are not satisfied with the board for any reason, ship it back and a replacement will be shipped to you or a full refund will be provided. In the event that there are no more of the item(s) in stock, a back order can be made.
Please keep in mind there is no warranty after seven days and any repairs or replacements will be made at regular hourly cost.
Please note: so far all non-working PCBs have turned out to be due to customer error using faulty game controllers or systems. Please make sure your gaming controllers and systems are 100% functional before reporting problems. This will save me a lot of time answering emails, thanks :)
Liability Notice:
This is an add-on device not originally designed for your vintage video game system. As such, it is always possible, however unlikely, that some harm might come to your vintage gaming system by using this device. Given the nature of failing capacitors and aging electronics, I cannot predict all behavior and results. Every board is thoroughly tested prior to shipment and all boards include fuse protection. However, please use this product at your own risk.
There are many other new projects and designs on the way! Until that's ready, check out the new Projects and Repairs pages!
